Couplings
Dairy Coupling
Pipe coupling for foods and chemistry according to DIN 11851, colloquially also called “dairy thread” consists of male threaded part-liner – round slotted nut- D shaped seal ring.
Materials Available In
| 1.4301(304) | 1.4404(316L) |
Data Sheet
Applications
End Connections
| Weld | Clamp | Threaded |
| Flanged |
Accessories
| O Rings (seal) |
Seal Material
| PTFE | Buna-N | Silicone |
| Viton | EPDM |
- Electro-polished external surface for improved hygiene
- Additional wrench surface to prevent twisting of the hose when fitting one half of the coupling to the other half
- Extra-long head for easy assembly and disassembly + marking heat number + size
- Low RA-value of inner surface up to ≤ 1.6μm
- Easy assembly of rubber protection ring
- Standard NBR seal conforming FDA directive and ADI-free
- Electro-polished external surface for improved hygiene
- Additional wrench surface to prevent twisting of the hose when fitting one half of the coupling to the other half
- Extra-long head for easy assembly and disassembly + marking heat number + size
- Low RA-value of inner surface of ≤1.6ΜM
- Hose shank for assembly with safety clamps and swage ferrules
- Easy assembly of rubber protection ring
- Standard EDPM seal, conforming FDA directive
- The SMS Aseptic fitting is a patented modified version of the SMS standard union, designed to accept an ‘L’ section joint ring and give a true crevice free bore.
- On assembly, the nut is tightened until metal to metal contact is made between the outer rim of the liner and male part.
- This gives a present compression on the seal, eliminating the possibility of overtightening and prolonging joint life.
- The liners are of the long type with a shoulder which is dimensioned and tolerance to locate inside the nut to give perfect concentric alignment on assembly.
Couplings
Dairy Coupling
Pipe coupling for foods and chemistry according to DIN 11851, colloquially also called “dairy thread” consists of male threaded part-liner – round slotted nut- D shaped seal ring.
Data Sheet
Materials Available In
| 1.4301(304) | 1.4404(316L) |
Applications
End Connections
| Weld | Clamp | Threaded |
| Flanged |
Accessories
| O Rings (seal) |
Seal Material
| PTFE | Buna-N | Silicone |
| Viton | EPDM |
- Electro-polished external surface for improved hygiene
- Additional wrench surface to prevent twisting of the hose when fitting one half of the coupling to the other half
- Extra-long head for easy assembly and disassembly + marking heat number + size
- Low RA-value of inner surface up to ≤ 1.6μm
- Easy assembly of rubber protection ring
- Standard NBR seal conforming FDA directive and ADI-free
- Electro-polished external surface for improved hygiene
- Additional wrench surface to prevent twisting of the hose when fitting one half of the coupling to the other half
- Extra-long head for easy assembly and disassembly + marking heat number + size
- Low RA-value of inner surface of ≤1.6ΜM
- Hose shank for assembly with safety clamps and swage ferrules
- Easy assembly of rubber protection ring
- Standard EDPM seal, conforming FDA directive
- The SMS Aseptic fitting is a patented modified version of the SMS standard union, designed to accept an ‘L’ section joint ring and give a true crevice free bore.
- On assembly, the nut is tightened until metal to metal contact is made between the outer rim of the liner and male part.
- This gives a present compression on the seal, eliminating the possibility of overtightening and prolonging joint life.
- The liners are of the long type with a shoulder which is dimensioned and tolerance to locate inside the nut to give perfect concentric alignment on assembly.